Open Cricut Designs Space and open my Baby Milestone Onesies Project. Measure your baby bodysuits and size each of the designs design accordingly. Click “Make It” and don’t forget to click the mirror slider to mirror your design. Follow the prompts to connect your machine and select your cutting material.

Place your Infusible Ink on the mat with the plastic side facing down. I like to use a Strong Grip Mat for Infusible Ink and to use my Cricut Brayer to push my Infusible Ink onto the cutting mat. Cut out your designs using your Cricut machine.

Pre-heat your Cricut Autopress to 385F. Weed your designs, removing the Infusible Ink from around your design, leaving just your design behind on the clear plastic liner.

Use a lint roller to remove any lint or debris from your bodysuit. Put a piece of cardstock inside the bodysuit to prevent any bleed through and then heat the bodysuit for 15 seconds.

Position your design on your bodysuit. Tape in place using heat resistant tape avoiding covering the design.

Place your onesie onto the Autopress. Cover with butcher paper and press for 50 seconds.

Remove the plastic liner and design once the bodysuit is cool to the touch.

Repeat with remaining bodysuits.